NK-AT80 Full atomatik aluminum tsare ganga samar line

NK-AT80 Cikakkun layin samar da kwandon kwandon na atomatik na atomatik Featured Image

Takaitaccen Bayani:

Wannan ingantaccen ƙirar kayan aikin yana cikin: 1, yana ƙunshe da mai AL-foil, Ciyarwar AL-foil, ɗaukar kaya, tarawa yayin samarwa, kuma ɓangaren lantarki na layin yana ɗaukar ikon PLC, ya fahimci samar da ƙarancin hominization wanda gabaɗaya aluminum. akwatin tambura fitar, haka inganta operators'security ƙwarai.2, Fadada da aluminum tsare abu amfani nisa, ya za'ayi a kan high daidaito rationalization layout zuwa Multi-rago mold, tashe da aluminum tsare mgteria amfani factor ƙwarai.3, The ci-gaba samar. sarrafa sana'o'in hannu gami da madaidaicin fasahar kera suna sa ingancin samfurin da wannan kayan aikin ke samarwa ya zama mafi girma

Aika mana imel

Cikakken Bayani

Tags samfurin

Siffofin Samfur

Dukan layin samarwa ya haɗa da: injin ciyarwa, injin latsawa, stacker atomatik, mai tattara shara.

Wannan kayan aikin yana samar da kowane nau'in kayan aiki na musamman na kayan kwandon kwandon aluminium, ya dace da kauri AL-kauri 0.035-0.28mm, Maxwidth na ciyarwa shine 550MM.

1. Wutar lantarki: 16kw (jerin da aka makala)
2.samar da inganci: 20-70Time / min;Rate na ƙãre kayayyakin: Shi ne ba kasa da 98%
3. The man a kan fuskar AL-foil ne gwani stretch man, iya volatilize ga cakuda.
4.Total gas-matsa lamba mita: 0.7kp ~ 0.8kp;babba mold gas-matsi: 0.4kp;saukar da mold gas-matsi: 0.2kp.Mitar iskar gas-minti ta gefen-busa:0.3-0.65kp.
5.Aikin kayan aiki:

lakabi	Aikin wutar lantarki	Ƙarfi	inganci	jimlar jimlar guda ɗaya
1	Mai motar	5.5KW	1 hasumiya	5.5KW
2	Lube mai famfo motor	120W	1 hasumiya	120W
3	Roller motor tare da mai	1.5W	1 hasumiya	1.5KW
4	stepper motor	200W	1 hasumiya	200W
6	Mai tara shara	4KW	1 hasumiya	4KW
7	hydraulic baling press	4KW	1 hasumiya	4KW
8	mai ɗaukar bel motor	370W	1 hasumiya	370W
9	Magnetic foda birki	200W	2	400
10	Motar da aka kunna	200W	3 ko 2)	600W (400WI
Jimlar				16.69KW

Bukatar aikin samarwa

Tushen wutan lantarki	Mataki na uku ƙarfin lantarki	Juzu'i ɗaya ƙarfin lantarki	Kewayon mita	Kewayon mita	Matsin lamba
AC uku-fase biyar waya gami da tsaka tsaki waya da ƙasa waya	380V (ko 220V)	220v	50/60Hz	Kasa da 50 ℃	Amfani = 1m3/min, 0.6-1MPa

$[ZK_ZW}[_}E@A72NE8{G]IQ$

Ƙayyadaddun aikin kowane sashi

1. Electric panel: Electric iko taro
2.Uncolier naúrar: man AL- tsare biyu-fuska, kuma fiye da mirgine fita.
3.Waster shiryawa: shirya kayan kwalliyar Aluminum
4.Stacking: atomatik stacking kayayyakin
5. Latsa na'ura: danna na'ura mai watsa shiri.
6.Mai tarawa;tattara al-foil ɗin sharar kuma aika shi zuwa injin tattara kaya.

Wannan kayan aikin yana karɓar ra'ayi "aiki mai zaman kansa, cikakkiyar gudanarwa" don gudanar da kowane ɓangaren motsi.sa kowane ɓangaren motsi yana da alaƙa amma kada ku tsoma baki tare da juna, PLC don sarrafa duk bayanan bayanan, inganta ingantaccen kayan aiki da daidaiton bayanai.

Ka'idar mold forming

Upper mold motsi ƙasa zuwa yankan namiji mutu, da yankan mace mutu don yanke kayan, babba mold ci gaba da motsi ƙasa, blank mariƙin da yankan namiji mutu samar da blank mariƙin da karfi a cikin mataki na kasa Silinda, kuma gane matakin farko mikewa a cikin mataki na babba mold core da kuma ƙasa mold core.Na farko matakin mikewa mace mutu ci gaba da motsi, don gane na biyu matakin mikewa da na biyu matakin mikewa mutu, ejector sa sign on kayayyakin a lokaci guda. sarari zagaye na birgima a cikin aikin ƙasan Silinda, mirgina samfuran zuwa zagaye kuma ci gaba da hawa sama, silinda na ƙasa yana fitar da samfuran waje, da busa daga mold a cikin aikin abin hurawa.

Na baya: Al-foil kwandon haɗe-haɗe-haɗe-haɗe-haɗe

Na gaba: NK-AT63 Cikakken Layin Samar da Akwatin Abincin Abinci ta atomatik